The IMER Step 120 is a compact mortar pump designed for pumping, spraying, and injecting a wide range of pre-mixed materials. It is especially valued for mobility, ease of operation, and versatility on construction sites.
Primary Applications
1. Cement Mortar Pumping
2. Plastering Works (Spray Application)
3. Grouting Applications( Below 20 BAR)
4. Repair & Rehabilitation Works
5. Tile Adhesive & Finishing Mortars
Materials Compatible with STEP 120
• Cement mortar
• Ready-mix dry mortar
• Grout and micro-concrete
• Tile adhesive
• Fine plaster materials
Key Features
Compact & portable - Easy movement within congested sites
Reduced manual handling - Improves efficiency and safety
Consistent flow rate - Better quality control
Ideal for confined spaces - Interiors, basements, renovations
FAQs
Why does choosing the right IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP matter on a UAE project? An under-specified or poorly maintained imer step 120 plaster /grout/fireproofing/screed pump slows a schedule down and is a common cause of on-site incidents, while a correctly specified, well-maintained unit keeps output consistent and meets the safety and quality standards expected on Abu Dhabi and Dubai construction and industrial sites.
How do I get a rental rate for the IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP? Contact Sparkline Group with your project location, expected rental duration and site requirements, and our team will confirm a rate and availability for the IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP — book directly through our rental team or via the enquiry form on this page.
Is the IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP available for delivery across the UAE and GCC? Yes — Sparkline Group supplies and delivers the IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP to project sites across Abu Dhabi, Dubai, Sharjah and the wider UAE, with support for GCC-wide delivery on request.
What rental durations and terms are available for the IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP? The IMER STEP 120 PLASTER /GROUT/FIREPROOFING/SCREED PUMP can be rented on short-term (daily/weekly) or long-term (monthly and project-length) terms, with servicing and breakdown support included for the duration of the rental — talk to our team about the terms that suit your project programme.
Why do UAE contractors choose IMER mixers and Plastering Machines? On active UAE construction and industrial sites, downtime is expensive — IMER builds its mixers and Plastering Machines for the duty cycles and site conditions that come with heavy, repeated daily use, which is why the brand has a following among contractors who need equipment that keeps working through a full project programme, not just a demo.
How do I get pricing for a IMER mixer and Plastering Machine? Reach out through our contact page or the enquiry form on this brand's page with the model you're interested in and your project details, and our sales team will confirm current pricing, availability and — where relevant — rental terms.
Why does choosing the right BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES matter on a UAE project? An under-specified or poorly maintained battipav p2 pump for block cutting machines slows a schedule down and is a common cause of on-site incidents, while a correctly specified, well-maintained unit keeps output consistent and meets the safety and quality standards expected on Abu Dhabi and Dubai construction and industrial sites.
How do I get pricing for the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES? Pricing for the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES depends on the exact specification and quantity required — submit a quote request through the enquiry form on this page or contact Sparkline Group directly, and our sales team will respond with a formal quotation.
Is the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES available for delivery across the UAE and GCC? Yes — Sparkline Group supplies and delivers the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES to project sites across Abu Dhabi, Dubai, Sharjah and the wider UAE, with support for GCC-wide delivery on request.
Does the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES meet UAE compliance and safety standards? Yes — the BATTIPAV P2 PUMP FOR BLOCK CUTTING MACHINES is supplied to meet the safety and quality standards expected on UAE construction and industrial sites, and Sparkline Group's technical team can advise on the certification or documentation your project requires.
Can I rent Screed / Sand Transfer Pumps for a short-term project in the UAE? Yes. Screed / Sand Transfer Pumps is available for both short-term and long-term hire from our Musaffah, Abu Dhabi warehouse, with delivery arranged across the UAE and GCC depending on your project location.
Do you provide an operator or installation support with the rental? Our team can arrange delivery, installation, and commissioning for rented equipment, and can advise on operating requirements — ask our rental desk when requesting a quote for the specifics of this category.
What is the typical rental period and how do I extend it? Rental terms are flexible and quoted per project — daily, weekly, or monthly — and can be extended by contacting your Sparkline Group representative before the current term ends, subject to equipment availability.
What is a screed/sand transfer pump used for? It pumps flowing screed mixes and sand-based materials through a hose from a mixing point to the application area — commonly used for floor screeding ahead of tiling, and for moving sand-cement mixes across a site or up to higher floors.
Can this pump reach upper floors of a tower or multi-storey building? Yes — screed pumps are commonly used with riser hoses to reach upper floors, avoiding manual barrowing. Confirm your building height and hose-run distance with our team so the right unit and hose length are allocated.
What screed mix types can be pumped? Sand-cement screeds and similar flowing floor-preparation mixes are the standard application — tell our rental desk your mix design when booking so the correct pump and nozzle setup is confirmed.
Do you provide an operator with the rental? Our rental desk can arrange delivery, installation and commissioning, and can advise on operating requirements for your specific screeding schedule — ask when requesting a quote.
What is the typical rental period for a screed pump? Rental terms are flexible — daily, weekly, or monthly — matched to your finishing-phase programme, and can be extended by contacting your Sparkline Group representative before the term ends, subject to availability.
Is delivery available across the UAE and GCC? Yes, we deliver from our Musaffah, Abu Dhabi warehouse across the UAE and wider GCC, coordinated around your project location and finishing schedule.
What happens if the pump has an issue mid-rental? Our maintenance and breakdown-response support is included for the rental term — contact your Sparkline Group representative and we'll arrange a repair or swap unit promptly to avoid delaying flooring trades.
Can the same pump handle plain sand transfer without screed additives? Yes — sand transfer pumps in our fleet handle plain sand-based material movement as well as prepared screed mixes; tell us the intended use when booking so the right configuration is provided.
What site setup is needed before the pump arrives? A stable standing area near the mixing point, clear hose-run access to the application area, and (for upper-floor pumping) confirmed riser/hose routing are generally all that's required — our team can advise during booking.
Is spare-parts and maintenance support available if I purchase instead of rent? Yes — Sparkline Group also sells screed and sand transfer pumps outright with the same genuine-parts and after-sales support provided on our full rental fleet.