30 m³/hr Mobile Batching Plant by Venus Equipment, UAE
The Venus CCP 30 is a mobile concrete batching plant with a compact design that fits into tight sites, with a pan/planetary/twin-shaft mixer and digital load-cell weighing of aggregate, cement, water and admixture. Theoretical output is 30 m³/hr, with a fully automatic PLC-based control panel and discharge height of roughly 2.1 m.
It suits residential, road and infrastructure projects where relocation between sites and consistent batch quality both matter.
The Venus CCP 30 Mobile Concrete Batching Plant is built around the following specification: output (theoretical) of 30 M3/Hr; mixer type of Pan / Planetary / Twin Shaft; material storage system of 2x2 cross bin feeder; material storage capacity of 14 M3; material weighing system of Digital load-cell based, separate weighing of aggregate, cement, water and additive; control panel of Fully automatic PLC based control panel with internal cabling; concrete discharge height of 2.1 m from ground level; total connected power of 50 HP; suggested dg set of 82 KVA. These figures reflect the manufacturer's own published specification sheet and should be confirmed against your specific project requirements and, where flagged elsewhere in our documentation, verified before final order confirmation.
The CCP 30 suits projects where the batching plant itself needs to relocate - road construction along an alignment, short-duration contracts at remote sites, or projects running across multiple locations in sequence. It combines storage, weighing, conveying, mixing and discharge into one compact, fully automatic unit that moves on a single trailer, making it a practical choice wherever installing and later decommissioning a stationary plant would cost more than the project can justify. Infrastructure contractors, road-building crews and project teams working across dispersed sites all rely on this mobility to keep concrete production close to the point of need without the overhead of a fixed installation.
The CCP 30 is built for exactly the scenario where mobility matters more than maximum output - a fully automatic PLC-based control panel with internal cabling keeps batching consistent regardless of how many times the plant has relocated, while digital load-cell weighing of aggregate, cement, water and admixture maintains accuracy batch after batch. The low discharge height common across this series simplifies loading directly into transit mixers or site transport without extra ramps or pits. Sparkline Group's local technical support and genuine Venus spare parts keep the CCP 30 productive across its working life, wherever in the UAE the project happens to be.
A mobile batching plant sees more wear from relocation than a stationary equivalent, making regular inspection of the trailer chassis, feeding system, weighing accuracy and control panel especially important after each move. Sparkline Group's service team supports the full ECO/CCP range across the UAE with scheduled maintenance, repair callouts and genuine Venus spare parts, helping contractors avoid the downtime that comes from deferred upkeep on equipment that moves between sites more often than a fixed installation would.
Sparkline Group supplies the Venus CCP 30 Mobile Concrete Batching Plant to contractors across every Emirate in the UAE. In Dubai, mobile batching plants support fast-moving infrastructure and road projects where the plant needs to track the work rather than stay fixed. In Abu Dhabi, the same mobility serves large-scale infrastructure corridors and remote industrial zone development. Sharjah's expanding road and infrastructure network increasingly relies on mobile batching capacity that can relocate as the project progresses.
In Abu Dhabi, Dubai, Sharjah - the UAE's largest construction markets - the CCP 30 supports everything from dense urban development to large-scale infrastructure and industrial projects. Beyond these three, Sparkline Group also supports contractors in Ajman, Umm Al Quwain, Ras Al Khaimah, Fujairah, where infrastructure expansion, industrial zone development and residential growth continue to drive demand for reliable Venus equipment. Across all seven Emirates, Sparkline Group provides the same level of technical support, genuine spare parts availability and after-sales service, so wherever your project is based in the UAE, the CCP 30 is backed by local expertise rather than a remote, disconnected supply chain.
Beyond the UAE itself, Sparkline Group also supports customers elsewhere in the GCC and wider Middle East - including Saudi Arabia, Oman, Bahrain, Kuwait and Qatar - with equipment sourcing, technical consultation and logistics support for the Venus CCP 30 and the rest of the Venus Mobile Concrete Batching Plant range.
Whether your project needs a single mobile plant for one relocation-heavy contract or a fleet supporting work across multiple UAE sites, Sparkline Group can help confirm the right CCP 30 for your mobility and output requirements. Contact us for a tailored quote covering supply, delivery, relocation support and ongoing service across the UAE and GCC.
The Venus ECO/CCP Series also includes the CCP 25, CCP 45, ECO 18, ECO 25, ECO 30, giving you a choice of capacity and configuration within the same proven design family rather than being locked into a single output tier. If the CCP 30 isn't the right fit for your project's specific production target, site conditions or budget, Sparkline Group's team can walk you through how it compares to the other models in the range - including capacity, footprint, power requirement and price - so you land on the right Mobile Concrete Batching Plant the first time rather than discovering a mismatch after delivery. Many contractors also standardize on one family across multiple projects, since shared spare parts, operator training and maintenance procedures across sibling models reduce the overhead of running mixed equipment fleets.
Is the Venus CCP 30 available for delivery across all Emirates?
Yes - Sparkline Group delivers and supports the CCP 30 in Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah, as well as to customers elsewhere in the GCC and Middle East.
Does Sparkline Group provide after-sales support for the CCP 30?
Yes - our service team provides scheduled maintenance, repair callouts and genuine Venus spare parts for the CCP 30 throughout its working life, not just at the point of sale.
Can I request a custom quote for the CCP 30?
Yes - contact Sparkline Group with your project location, production target and site conditions, and our team will confirm the right CCP 30 configuration and provide a tailored quote covering supply, delivery and ongoing service.