This genuine-fit mixing shaft is a core wear component inside the mixing drum of truck-mounted and stationary concrete mixers, including equipment in the Putzmeister mixing-plant lineage widely used across UAE ready-mix and precast operations. The shaft carries the mixing paddles that continuously fold and blend concrete, mortar, or screed material inside the drum, and is one of the highest-wear parts in the entire mixing system due to constant abrasive contact with aggregate and cement paste.
Sparkline Group supplies this shaft as a genuine OEM-matched replacement, manufactured to the same tolerances as the original equipment so it seats, rotates, and seals correctly against the drum bearings and end housings without the fitment issues common with generic aftermarket copies. Using a matched replacement protects the drum bearings and seals from the premature wear that an incorrectly toleranced shaft can cause. Sparkline Group stocks and supplies this part across Dubai, Abu Dhabi, Sharjah, and the wider UAE and GCC, with technical guidance available to confirm the correct shaft for your specific mixer model before you order.
Part number 700301940A is the standard version of this mixing shaft, fitted as the primary drum shaft on the relevant Putzmeister-lineage mixer models.
FAQs
What does a mixing shaft do inside a concrete mixer? The mixing shaft is the rotating spindle inside the mixer drum that carries the mixing paddles/blades, continuously folding and blending concrete, mortar, or screed material as the drum turns.
Why does a mixing shaft wear out? It runs in constant abrasive contact with aggregate, sand, and cement paste, so bearing surfaces, keyways, and paddle mounts gradually wear even with routine maintenance — eventually requiring replacement to keep mix quality and mixer performance consistent.
Is a genuine mixing shaft worth it over a generic aftermarket copy? Yes — genuine, OEM-matched shafts are manufactured to the tolerances the drum bearings and seals expect, which protects the rest of the mixing assembly; an incorrectly toleranced generic shaft can accelerate wear on the bearings and housings around it.
How do I know which mixing shaft fits my mixer? Confirm your mixer's model, drum size, and existing part number with Sparkline Group's team before ordering — several shaft variants exist within the same family, and matching the exact part avoids fitment issues.
What does an "HR" suffix on a shaft part number mean? It typically denotes a heat- and wear-resistant hardened version of the base shaft, intended for mixing plants under heavier duty cycles or more abrasive mix designs.
Do you carry mixing shafts in stock in the UAE? Sparkline Group stocks and supplies these mixing shafts across Dubai, Abu Dhabi, Sharjah, and the wider UAE and GCC — contact us to confirm current stock and lead time for your specific part number.
Can Sparkline Group help install a replacement mixing shaft? Yes — alongside spare parts supply, Sparkline Group's service team can support installation and drum reassembly for customers who need hands-on fitting rather than a parts-only order.
What warranty applies to a genuine mixing shaft? Genuine spare parts supplied by Sparkline Group carry the manufacturer's standard parts warranty against defects in material and workmanship — ask our team for the specific terms applicable to your order.
How long does delivery take for a mixing shaft in the UAE? Lead time depends on current stock and your location; Sparkline Group prioritises fast turnaround across the UAE and GCC and will confirm an exact delivery estimate at the time of order.
What other mixer parts should I check when replacing the mixing shaft? It's good practice to inspect the drum bearings, seals, and mixing paddles at the same time — a worn shaft can accelerate wear on these surrounding components, so replacing them together where needed reduces future downtime.
Do you carry mixing shafts in stock in the UAE? Sparkline Group stocks and supplies these mixing shafts across Dubai, Abu Dhabi, Sharjah, and the wider UAE and GCC — contact us to confirm current stock and lead time for your specific part number.
Do you carry mixing shafts in stock in the UAE? Sparkline Group stocks and supplies these mixing shafts across Dubai, Abu Dhabi, Sharjah, and the wider UAE and GCC — contact us to confirm current stock and lead time for your specific part number.
Do you carry mixing shafts in stock in the UAE? Sparkline Group stocks and supplies these mixing shafts across Dubai, Abu Dhabi, Sharjah, and the wider UAE and GCC — contact us to confirm current stock and lead time for your specific part number.
What is the Vibrating Poker Shafts Coupling Type used for? The Vibrating Poker Shafts Coupling Type is used by contractors, precast producers and industrial teams across the UAE as part of the Concrete Vibrator And Poker Shafts equipment category, supporting day-to-day site operations from small refurbishment jobs to large infrastructure and industrial projects.
What are the key specifications of the Vibrating Poker Shafts Coupling Type? The Vibrating Poker Shafts Coupling Type is built and specified for reliable output under real UAE site conditions — matching capacity, power and duty-cycle to the job is what determines whether it keeps a schedule on track. Sparkline Group's team can talk through the exact specification sheet and confirm it's the right fit for your project before you commit.
Why does choosing the right Vibrating Poker Shafts Coupling Type matter on a UAE project? An under-specified or poorly maintained vibrating poker shafts coupling type slows a schedule down and is a common cause of on-site incidents, while a correctly specified, well-maintained unit keeps output consistent and meets the safety and quality standards expected on Abu Dhabi and Dubai construction and industrial sites.
How do I get pricing for the Vibrating Poker Shafts Coupling Type? Pricing for the Vibrating Poker Shafts Coupling Type depends on the exact specification and quantity required — submit a quote request through the enquiry form on this page or contact Sparkline Group directly, and our sales team will respond with a formal quotation.
What are the key specifications of the Vibrating Poker Shafts Pin Type? The Vibrating Poker Shafts Pin Type is built and specified for reliable output under real UAE site conditions — matching capacity, power and duty-cycle to the job is what determines whether it keeps a schedule on track. Sparkline Group's team can talk through the exact specification sheet and confirm it's the right fit for your project before you commit.
Why does choosing the right Vibrating Poker Shafts Pin Type matter on a UAE project? An under-specified or poorly maintained vibrating poker shafts pin type slows a schedule down and is a common cause of on-site incidents, while a correctly specified, well-maintained unit keeps output consistent and meets the safety and quality standards expected on Abu Dhabi and Dubai construction and industrial sites.