30 m³/hr Compact Batching Plant by Venus Equipment, UAE
The Venus CP 30 is a compact concrete batching plant for small to medium-scale construction, built around a twin-shaft/pan/planetary mixer with a 2x2 cross-bin feeder (20 m³ storage) and digital load-cell weighing of aggregate, cement, water and admixture. Its theoretical rated output is 30 m³/hr, with a fully automatic PLC-based control panel and concrete discharge at approximately 4.2 m.
It suits ready-mix, precast and general construction use, with optional SCADA control, cement storage silos and material feeding conveyors available to extend capacity. Sparkline Group's technical team can confirm the exact configuration and verified output for your specific project before you order.
The Venus CP 30 Compact Concrete Batching Plant is built around the following specification: output (theoretical) of 30 Cu.m/Hr; mixer type of Twin Shaft / Pan / Planetary; number of bins of 4 Bin (2x2 Cross Bin); material storage capacity of 20 M3; material weighing system of Digital load-cell based, separate weighing of aggregate, cement, water and additive; material feeding system of Through inclined belt conveyor; maximum aggregate size of 40 mm; control system of Fully automatic PLC based control panel; concrete discharge height of 4.2 m from ground level; total connected power of 52 HP; suggested dg set of 82 KVA. These figures reflect the manufacturer's own published specification sheet and should be confirmed against your specific project requirements and, where flagged elsewhere in our documentation, verified before final order confirmation.
The CP Series suits applications where a compact footprint and quick installation matter as much as output. Ready-mix producers use CP 30 to supply concrete directly to construction sites without the space demands of a larger stationary plant. Precast manufacturers favour the available twin-shaft, pan and planetary mixer configurations for consistent, repeatable batches across production runs. General contractors on residential, commercial and light infrastructure projects rely on the CP 30 where site space is limited but production still needs to keep pace with the pour schedule. The plant's modular design also makes it a practical choice for contractors running multiple smaller sites, since the unit can be relocated between projects with comparatively little downtime compared with a full stationary installation.
Choosing a Venus CP 30 means choosing a system built around digital load-cell weighing of aggregate, cement, water and admixture, giving consistent batch accuracy that holds up across long production runs. The fully automatic PLC-based control panel reduces the operator skill burden on site, while the compact 2x2 cross-bin feeder keeps the plant's footprint manageable even on constrained urban sites. Several models in the range offer a choice of twin-shaft, pan or planetary mixer, so the plant can be matched to your specific mix design rather than forcing a one-size-fits-all configuration. Backed by Sparkline Group's local technical support, spare parts availability and after-sales service, the CP 30 is a dependable long-term investment rather than a short-term fix.
Like any batching plant, a CP 30 performs best with a consistent maintenance routine - regular inspection of the weighing system, conveyor belt, mixer wear parts and control panel keeps batching accuracy consistent and reduces unplanned downtime. Sparkline Group's service team supports the full CP Series range across the UAE with scheduled maintenance, repair callouts and genuine Venus spare parts, helping contractors keep their CP 30 in productive service for its full working life rather than treating upkeep as an afterthought once a fault has already appeared.
Sparkline Group supplies the Venus CP 30 Compact Concrete Batching Plant to contractors across every Emirate in the UAE. In Dubai, the model supports ready-mix and precast producers working on the city's dense construction pipeline, where a compact footprint is often the deciding factor on tight urban sites. In Abu Dhabi, contractors on infrastructure, industrial and residential developments rely on it for consistent batching output across large-scale government and private-sector projects. Sharjah's growing industrial and residential sectors are served by the same configuration, supporting both precast manufacturing and general construction supply.
In Abu Dhabi, Dubai, Sharjah - the UAE's largest construction markets - the CP 30 supports everything from dense urban development to large-scale infrastructure and industrial projects. Beyond these three, Sparkline Group also supports contractors in Ajman, Umm Al Quwain, Ras Al Khaimah, Fujairah, where infrastructure expansion, industrial zone development and residential growth continue to drive demand for reliable Venus equipment. Across all seven Emirates, Sparkline Group provides the same level of technical support, genuine spare parts availability and after-sales service, so wherever your project is based in the UAE, the CP 30 is backed by local expertise rather than a remote, disconnected supply chain.
Beyond the UAE itself, Sparkline Group also supports customers elsewhere in the GCC and wider Middle East - including Saudi Arabia, Oman, Bahrain, Kuwait and Qatar - with equipment sourcing, technical consultation and logistics support for the Venus CP 30 and the rest of the Venus Compact Concrete Batching Plant range.
Whether you are sourcing a batching plant for a single project or building out a long-term equipment fleet, Sparkline Group's team can help confirm the right CP 30 configuration for your production target, site conditions and mix design. Contact us for a tailored quote covering supply, delivery, installation support and ongoing service across the UAE and GCC.
The Venus CP Series also includes the CP 25, CP 36, CP 45, CP 60, CP 75, CP 90, giving you a choice of capacity and configuration within the same proven design family rather than being locked into a single output tier. If the CP 30 isn't the right fit for your project's specific production target, site conditions or budget, Sparkline Group's team can walk you through how it compares to the other models in the range - including capacity, footprint, power requirement and price - so you land on the right Compact Concrete Batching Plant the first time rather than discovering a mismatch after delivery. Many contractors also standardize on one family across multiple projects, since shared spare parts, operator training and maintenance procedures across sibling models reduce the overhead of running mixed equipment fleets.
Is the Venus CP 30 available for delivery across all Emirates?
Yes - Sparkline Group delivers and supports the CP 30 in Abu Dhabi, Dubai, Sharjah, Ajman, Umm Al Quwain, Ras Al Khaimah and Fujairah, as well as to customers elsewhere in the GCC and Middle East.
Does Sparkline Group provide after-sales support for the CP 30?
Yes - our service team provides scheduled maintenance, repair callouts and genuine Venus spare parts for the CP 30 throughout its working life, not just at the point of sale.
Can I request a custom quote for the CP 30?
Yes - contact Sparkline Group with your project location, production target and site conditions, and our team will confirm the right CP 30 configuration and provide a tailored quote covering supply, delivery and ongoing service.